IBM 9000s Manual De Usuario
6
Step 9. Run the Configuration Wizard
❑
Double-click the Enterprise Fabric Suite 2007 shortcut, or select Enterprise Fabric Suite 2007 from Start menu,
depending on how you installed it.
depending on how you installed it.
❑
The Configuration Wizard tool auto-detects and configures the switch based on selected options and recommended
settings. Follow the instructions to set network parameters and the password. The default user name is admin; the
default password is password.
settings. Follow the instructions to set network parameters and the password. The default user name is admin; the
default password is password.
NOTE:
If you are using an Ethernet switch and the auto-connect process fails due to a time out, try a direct connection
from your workstation to the switch using an Ethernet cross-over cable.
Step 10. Connect Devices and Switches
❑
Connect fiber optic cables between the installed transceivers and their corresponding devices. Each port
auto-negotiates the proper port type with the connected device or switch.
auto-negotiates the proper port type with the connected device or switch.
Congratulations
You have successfully installed your QLogic SANbox 9000 Series Switch
You have successfully installed your QLogic SANbox 9000 Series Switch