HP (Hewlett-Packard) PCI-9111DG/HR Manual De Usuario
8
•
Installation
Inspect the card module carton for obvious damage. Shipping and
handling may cause damage to your module. Be sure there are no
shipping and handing damages on the module before processing.
handling may cause damage to your module. Be sure there are no
shipping and handing damages on the module before processing.
After opening the card module carton, extract the system module and
place it only on a grounded anti -static surface component side up.
place it only on a grounded anti -static surface component side up.
Again inspect the module for damage. Press down on all the socketed
IC's to make sure that they are properly seated. Do this only with the
module place on a firm flat surface.
IC's to make sure that they are properly seated. Do this only with the
module place on a firm flat surface.
Note:
DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
DAMAGED.
You are now ready to install your PCI-9111.
2.3
PCI-9111's Layout
Figure 2.1 PCB Layout of the PCI-9111