Motorola 326X V.34 Manual De Usuario
2-2 Installing the Modem
Installi
ng
the M
odem
Introduction
This chapter describes how to install and connect a 326X Series Modem. In this
chapter, you:
chapter, you:
• Unpack the modem
• Choose an appropriate site to install the modem
• Familiarize yourself with the modem’s rear panel and connectors
• Connect the modem to a PC or other data terminal equipment (DTE)
• Connect the modem to a telephone handset (if appropriate) and to the
dial/leased telephone line jacks
• Attach ferrite cylinders, if necessary
• Connect the modem to a Network Management System (NMS), if appropriate
• Turn on the modem and run the unit’s automatic self-test
IMPORTANT: Telephone company and governmental regulations vary by country.
Your modem’s rear panel layout and cabling may vary from that shown in this guide.
Your modem’s rear panel layout and cabling may vary from that shown in this guide.
Refer to Appendix C for a description of the modem rear panel and cabling;
important safety guidelines for connecting the modem in your country; and
regulatory restrictions and requirements.
important safety guidelines for connecting the modem in your country; and
regulatory restrictions and requirements.
To order cables, refer to Appendix B; then contact your Motorola sales representa-
tive or local distributor for ordering information.
tive or local distributor for ordering information.
NOTE: If you are installing a 326X Series Modem card, refer to the addendum,
326X Series Modem Cards, shipped with your modem’s backplane.
326X Series Modem Cards, shipped with your modem’s backplane.