ZyXEL Communications Omni.Net Lite Manual De Usuario
Omni.Net Lite User’s Guide
63
Chapter 3 Using AT Commands
Figure 20 AT Command Example 2
3.4.3 Setting Ports Priority
To set the same priority for both ports, enter AT\P2=0 and press [ENTER].
To set the PHONE 1 port to have the first priority, enter AT\P2=1 and press [ENTER].
To set the PHONE 2 port to have the first priority, enter AT\P2=2 and press [ENTER].
3.4.4 Disabling Call Waiting
A call waiting tone will interfere with data communication. It is highly recommended that you
disable the call waiting feature on the port to which a fax or modem is connected.
disable the call waiting feature on the port to which a fax or modem is connected.
To disable call waiting on either port, enter AT!1A1=0 or AT!2A1=0 and press [ENTER].
3.4.5 Link Authentication
Table 17 PPP AT commands
AT COMMANDS
DESCRIPTION
AT%M1=0
Disable PAP to CHAP conversion (default).
AT%M1=1
Enable PAP to CHAP conversion.