Multi-Tech Systems MT5634MSV Manual De Usuario

Command:

Values:

n = 0, 1, 3 or 6

Default:

None

Description:

&T0

Abort. Stop any test in progress.

&T1

Local analog loopback test.

&T3

Local digital loopback test.

&T6

Remote digital loopback test.

 To stop a test, you must use the escape sequence (+++AT) before typing

.

Command:

Values:

n/a

Description:

Displays the active modem settings, including the callback se-
curity settings if callback security is enabled. If the setup pass-
word has been entered, it also displays the callback security
passwords.

Command:

Values:

n = 0

Default:

None

Description:

&W0 Stores current modem settings in nonvolatile memory and

causes them to be loaded at power-on or following the ATZ
command instead of the factory defaults. See also the &F com-
mand.

&W1 Clears user default settings from nonvolatile memory and

causes the factory defaults to be loaded at power-on or follow-
ing the ATZ command.

Command:

Values:

n = 0

Default:

0

Description:

&Y0

Select stored configuration 0 on power-up. (For backward
compatibility with some software.)

&Y1

Not supported—responds ERROR.

Command: &Zy=x Store Dialing Command
Values:

y = 0–3 (callback security disabled) or 0–29 (callback security
enabled)
x = Dialing command

Default:

None

Description:

Stores dialing command x in memory location y. Dial the
stored number using the command ATDS=y. See also the
#CBSn

 command. For callback security options, see Chapter 6.

Command:

Values:

n/a

Description:

Provides a loopback from the microphone to the speaker. For
testing and debugging only.