Multi-Tech Systems MT5634MSV Manual De Usuario
MessageSaver User Guide
44
S42
decimal
0–1
1
Enables/disables the 56K auto rate. When
56K auto is disabled, fallback to V.34 is also
disabled. 0 = disable; 1 = enable.
56K auto is disabled, fallback to V.34 is also
disabled. 0 = disable; 1 = enable.
S43
decimal
0–1
1
For testing and debugging only. Enables/
disables V.32bis start-up auto mode
operation. 0 = disable; 1 = enable.
disables V.32bis start-up auto mode
operation. 0 = disable; 1 = enable.
S48
decimal
7 or 128 7
Enables (7) or disables (128) LAPM
negotiation. The following table lists the S36
and S48 configuration settings for certain
types of connections.
negotiation. The following table lists the S36
and S48 configuration settings for certain
types of connections.
S48=7
S48=128
LAPM or async
Async
LAPM or hangup
Do not use
LAPM, MNP, or aysnc
LAPM, MNP, or hangup
MNP or hangup
MNP or async
S36=0, 2
S36=1, 3
S36=4, 6
S36=5, 7
S89
seconds
0, 5–255 10
Sets the length of time in the off-line command
mode before the modem goes into standby
mode. A value of zero prevents standby
mode; a value of 1–4 sets the value to 5.
mode before the modem goes into standby
mode. A value of zero prevents standby
mode; a value of 1–4 sets the value to 5.
S108
decimal
0–3, 6, 7 6
Selects the 56K digital loss if using the
modem thru a PBX line. The default value is
-6 dB loss, the value used when calling from
a typical POTS line long distance.
modem thru a PBX line. The default value is
-6 dB loss, the value used when calling from
a typical POTS line long distance.
0 = -0 dB digital loss, no robbed-bit
signaling
1 = -3 dB PBX digital loss
2 = -2 dB digital loss
3 = -3 dB digital loss
6 = -6 dB digital loss
7 = -0 dB digital loss with robbed-bit
2 = -2 dB digital loss
3 = -3 dB digital loss
6 = -6 dB digital loss
7 = -0 dB digital loss with robbed-bit
signaling
S109
decimal
0–2
1
Selects the 56K operating mode.
0 = K56flex mode (V.90 disabled)
1 = Dual mode (K56flex or V.90)
2 = V.90 mode (K56flex disabled)
1 = Dual mode (K56flex or V.90)
2 = V.90 mode (K56flex disabled)
Register Unit
Range
Default
Description