ZyXEL Communications 4528F Manual De Usuario

 Chapter 40 Differentiated Services

XGS-4526/4528F/4728F User’s Guide

The following table describes the labels in this screen.

Use this screen to configure TRTCM settings. Click the 2-rate 3 Color Marker link 
in the DiffServ screen to display the screen as shown next. 

Table 126   IP Application > DiffServ 

Active

Select this option to enable DiffServ on the Switch.

Port

This field displays the index number of a port on the Switch. 

*

Settings in this row apply to all ports.

Use this row only if you want to make some settings the same for all ports. 
Use this row first to set the common settings and then make adjustments 
on a port-by-port basis. 

Note: Changes in this row are copied to all the ports as soon as you 

make them.

Active

Select Active to enable DiffServ on the port. 

Apply

Click Apply to save your changes to the Switch’s run-time memory. The 
Switch loses these changes if it is turned off or loses power, so use the 
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.

Cancel

Click Cancel to begin configuring this screen afresh.