Acer R500 Manual De Usuario

Descargar
Página de 142
 1 System overview
4
Memory
The four DIMM sockets on board accept using 64-, 72-, 128-, 144-, 
512-MB and 1-GB  SDRAM (synchronous DRAM) DIMMs for a maximum 
memory upgrade capacity of up to 4 GB.  For data integrity, the default 
setting of the ECC (error-correcting code) function of the memory 
system in BIOS is enabled.  See “Memory/Cache Options” on page 87 
for more on this BIOS setting.
Note: The SDRAM should work under 3.3 volts only; 5-volt 
memory devices are not supported.
The mainboard supports both 200 and 266 MHz SDRAM DIMMs 
(PC-1600 and PC-1200).
System chipsets
Server Works RCC chipset
The Server Works RCC chipset was specifically designed to meet the 
needs of high performance systems.  It consists of following 
components: 
HE-SL-T (north bridge) provides the host interface, memory system 
control interface and PCI interface. 
CIOB2 (I/O bridge) is a peripheral chip that performs PCI bridging 
function between the hub interface and the PCI bus. It can provide 
arbitration support for six PCI devices and manage 2 x 66 Mhz PCI 
slots.
CSB5 (south bridge) integrates LPC interface and super I/O 
functions like keyboard and mouse interface, floppy disk 
controller, advanced digital data separator, serial port, on-chip 12 
mA AT bus drivers, one floppy direct drive support, and Intelligent 
Power Management (IPM) support.
aa r500.book Page 4 Thursday, September 20, 2001 11:06 AM