Addonics Technologies NASU2 Manual De Usuario

Network Environment 
There are 3 different setup conditions you can choose: 
 
A. Setup NAS Adapter as a DHCP Client: 
If your NAS adapter is connected to a LAN network with an active DHCP server, 
it will obtain an IP address from DHCP server automatically. 
 
B. Setup NAS Adapter as DHCP Server: 
If your LAN network does not have an active DHCP server, NAS adapter will 
immediately act as DHCP server and assign itself an IP address for installation. 
 
C. Setup NAS Adapter in Static IP environment: 
You need first configure the IP address for NAS adapter to operate in the static 
IP environment. For Configuring details, please refer to “IP Config” setup page. 
 
2.0  

 
Connections: 

1.  Connect external USB Storage device into USB port of the NAS 

Adapter. Power on the USB Storage device. 

2.  Connect LAN cable via LAN switch and Router. 
3.  Connect 5V power adapter to power up the NAS adapter 

 

 
NAS Adapter connected directly to a computer’s NIC card 
If you connect the NAS adapter to a computer directly, the adapter will act as a 
DHCP server, assigning itself an IP address automatically and also will assign an 
IP address to the computer’s network card. 
 
NAS Adapter connected to a Router or Switch 
If your NAS adapter is connected to a LAN network with an active DHCP server, 
it will obtain an IP address from DHCP server automatically. Or if your LAN 
network does not have an active DHCP server, NAS adapter will immediately act 
as DHCP server and assign itself an IP address for installation 
 
3.0  

 
1.  Browse the CD enclosed in the product package. Copy and paste “SDisk 

Utility” in to your computer then double click the icon to start search. 

 

Note:  

“SDisk utility” was written with JAVA script, please make sure your 
computer has installed JAVA before, if not please install the JAVA script 
form the CD drive. 

 

 

 
2.  When NAS Adapter has been found, click “Connect” to enter configurations. 
 

1.  Open web browser and type default host name “storage” in the 

search bar. 

2.  Default login is “admin” for both User name and password. Click 

“OK” to enter configurations.