Acer WT 300 Manual De Usuario

The parallel printer connected to 
my terminal does not respond 
when I try to print to it.

1. Make sure that the printer is 

plugged into the proper outlet and 
is turned on.

2. Check the cable connection from 

the printer to the terminal.  See 
“Connecting the Printer” on page 9 
for more detail.

3. Make sure that the printer is on-

line.

4. Make sure that the printer is 

properly configured in the 
application server’s Print Manager, 
and that the printer has not been 
paused.

You are not able to make a network 
connection using the Terminal 
Connection Manager.

1. Press the “F2” key to call up the 

Terminal Properties dialog box.  
Select the Network tab and verify 
that the proper method for 
specifying the IP address is 
selected, DHCP or static IP.  If a 
static IP address is selected, verify 
that the IP, the subnet mask, and 
the gateway IP address are correct 
for the subnet that the terminal is 
connected to.

2. Make sure that the cable is 

connected to the network 
connector on the back panel of the 
terminal.  Check to make sure that 
the other end of the cable is 
connected to a hub or other 
network outlet.

3. If DHCP addressing is selected, 

check with your network 
administrator to make sure that 
the DHCP server for your subnet is 
functioning properly.

Wbt.book  Page 45  Monday, August 2, 1999  4:07 PM