Cisco Systems 7505 Manual De Usuario

The console display indicates whether or not the

operation was successful. A series of exclamation

points (!!!!) and [OK] (as shown in the preceding

example) indicates that the operation was successful.

A series of periods (. . .) and [timed out] or [failed]

indicates a failure due to a network fault or an

incorrect server name, address, or filename. The

following is an example of a failed attempt to boot

from a remote server:

Booting Router-confg ..... [timed out]

If the display indicates that the process was

step.

If the display indicates that the process failed, verify

the name or IP address of the remote server and the

filename, and repeat the preceding steps. If the

process fails again, contact your network

administrator.

Enter the show startup-config command

to confirm that the configuration file was

retrieved correctly. Look at the first line

for the configuration file size. Compare it

with the file you retrieved from the TFTP

server to confirm that it is correct.

Following is an example:

Router# show startup-config

Using 1186 out of 126968 bytes

!

version 12.0(9)S

hostname Router

!

Router#

To ensure that the startup configuration

file stored in NVRAM is the default

running configuration file used by the

system, enter the copy

nvram:startup-config command:

Router# copy system:running-config

Router#

%SYS-5-CONFIG_I: Configured from memory by

console

Router#

This completes the process for retrieving the

configuration file for the RSP.