Cisco Systems 700 Manual De Usuario
Software Images
Cisco700 Series Router Command Reference
1-2
•
Trivial File Transfer Protocol (TFTP server)
•
Simple Network Management Protocol (SNMP)
•
Routing Information Protocol (RIP) for IP and IPX
•
Triggered RIP for IP
•
Challenge Handshake Authentication Protocol (CHAP)
•
Dynamic Host Configuration Protocol (DHCP)
•
Port Address Translation (PAT)
•
Remote Common Application Programmers Interface (RCAPI)
•
ISDN Device Control Protocol (ISDN-DCP)
Software Images
The Cisco 700 Series routers run a proprietary Cisco software (Cisco IOS-700 software)
image, which is different than traditional Cisco IOS software. The image you use varies,
depending on the region in which the router is used and what feature set you desire. The
image name, for example, c760-in.r-TPH.43-1.bin, designates the region and features. The
regions are as follows:
image, which is different than traditional Cisco IOS software. The image you use varies,
depending on the region in which the router is used and what feature set you desire. The
image name, for example, c760-in.r-TPH.43-1.bin, designates the region and features. The
regions are as follows:
•
US for use in North America
•
NET3 for use in Europe
•
TR6 for use in Germany
•
INS for use in Japan
•
TPH for use in Australia
The features are indicated as follows:
•
Internet Ready (IP only, 30 users with data compression on) images have a "b"
designation.
designation.
•
Internet Ready X.25 (IP only, 30 LAN devices, compression, X.25) images have a "bxd"
designation.
designation.