Cisco Systems 700 Manual De Usuario
DHCP Server with IPCP Negotiation Example
Cisco700 Series Router Configuration Guide
5-8
Cisco 765 Series Router Commands
Following are the commands for configuring the remote Cisco 765 series router as a DHCP
server with IPCP negotiation with a Cisco 4500 router:
server with IPCP negotiation with a Cisco 4500 router:
set switch NI-1
set
1
dir
5551211
set
2
dir
5551212
set
1
spid
88855512110101
set
2
spid
88855512120101
set system
765
set dhcp server
set dhcp address
172.168.1.2 128
set dhcp netmask
255.255.255.0
set dhcp gateway primary
172.168.1.1
cd lan
set ip address
172.168.1.1
set ip netmask
255.255.255.0
set ip routing on
set user
4500
set ip routing on
set active
set
1
number
phone_number
set
2
number
phone_number
set ip routing on
set ip rip version 2
set ip rip receive v2
set ppp address negotiation local on
set ip rip update periodic
reboot
For detailed information regarding the commands listed here, refer to the Cisco 700 Series
Router Command Reference.
Router Command Reference.
Verify the Configuration
When a call is made, you can use the show ip configuration all and show ip route all
commands to see the IPCP negotiation address.
commands to see the IPCP negotiation address.
You can use the show dhcp configuration command to see the IP address returned by
DHCP.
DHCP.