Cisco Systems 700 Manual De Usuario
DHCP Server with PAT and IPCP Dual-Destination PPP Negotiation Example
Cisco700 Series Router Configuration Guide
5-14
Cisco 765 Series Router Commands
Following are the commands for configuring the remote Cisco 765 series router as a DHCP
server with PAT and IPCP multilink PPP to two routers running Cisco IOS software:
server with PAT and IPCP multilink PPP to two routers running Cisco IOS software:
set system
765
set ppp secret client
set ppp password client
set dhcp server
set dhcp address
172.168.99.2 128
set dhcp netmask
255.255.255.0
set dhcp gateway primary
172.168.99.1
set ip pat porthandler ftp
172.168.99.3
cd lan
set ip routing on
set ip address
172.168.99.1
set ip netmask
255.255.255.0
set user
2500
set ppp clientname
2500
set 1 number
phone_number
set 2 number
phone_number
set ip routing on
set ip route destination
0.0.0.0/0
gateway
30.169.100.2
set ip address
30.169.100.1
set ip netmask
255.255.255.0
set ip pat on
set active
set user
4500
set ppp clientname
4500
set 1 number
phone_number
set 2 number
phone_number
set ip routing on
set ip route destination
120.50.40.0/0
gateway
173.100.10.2
set ip address
173.100.10.1
set ip netmask
255.255.255.0
set ip pat on
set active
Note
If you create a multiple destination configuration with PAT enabled in both profiles,
the IP route destination must be specified, using the set ip route destination command.