Cisco Systems RV130W Manual De Usuario

Configuring a Mobile Network

Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide

25

 

Choose Networking > WAN > Mobile Network to configure to configure the 
device to connect to a Mobile Broadband USB modem that is connected to its 
USB interface. 

To configure global settings for supported USB devices:

Connect the USB modem. If the modem is supported, it is automatically detected 
and appears on the Mobile Network page.

Select Auto or Manual connection mode. Ethernet Connection Recovery works 
only if the Connect Mode is set to Auto. 

•

To enable your modem to establish a connection automatically, select Auto 
mode. If you select Auto, set a Connect on Demand time or select Keep Alive. 
Connect on Demand terminates the Internet connection after it is inactive for 
the period of time specified in the Max Idle Time field. 

If your Internet connection is terminated due to inactivity, the modem 
automatically reestablishes a connection when a user attempts to access 
the Internet. In the Max Idle Time field, enter the number of minutes of idle 
time that can elapse before the Internet connection terminates. Select Keep 
Alive to keep the connection active at all times.

•

To connect or disconnect your modem connection manually, select Manual 
mode.

The device displays the current modem connection status that includes initializing, 
connecting, disconnecting, or disconnected.