Cisco Systems RV130W Manual De Usuario

Configuring Basic Wireless Settings

Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide

68

 

Click Save to save your settings.

Click Back to go back to the Basic Settings page.

You can use MAC Filtering to permit or deny access to the wireless network based 
on the MAC (hardware) address of the requesting device. For example, you can 
enter the MAC addresses of a set of computers and only allow those computers to 
access the network. You can configure MAC Filtering for each network or SSID.

To configure MAC filtering:

In the Wireless Table (Wireless > Basic Settings), check the box for the network 
you want to configure.

Click Edit MAC Filtering. The Wireless MAC Filter page appears.

In the Edit MAC Filtering field, check the Enable box to enable MAC Filtering for 
this SSID.

In the Connection Control field, choose the type of access to the wireless 
network:

•

Prevent—Select this option to prevent devices with the MAC addresses 
listed in the MAC Address Table from accessing the wireless network. This 
option is selected by default.

•

 Permit—Select this option to allow devices with the MAC addresses listed 
in the MAC Address Table to access the wireless network.

To show computers and other devices on the wireless network, click Show Client 
List. 

In the Save to MAC Address Filter List filed, check the box to add the device to 
the list of devices to be added to the MAC Address Table.

Click Add to MAC to add the selected devices in the Client List Table to the MAC 
Address Table. 

Click Save to save your settings.

Click Back to go back to the Basic Settings page.