Cisco Systems RV215WAK9NA Manual De Usuario

 

RESET—The RESET button has two functions:

• To reboot the unit and retain the current  configuration, press and hold  

RESET for at least 3, but no more than 10 seconds, by using  a paper clip 
or a pen tip. 

• To reboot the unit and restore the factory default configuration, press 

and hold in the RESET button for more than 10 seconds.  Changes you 
have made to the Cisco RV215W configuration are lost.

LAN (1-4)—RJ-45  device connections to link local area network devices, 
such as PCs, print servers, or switches, to the firewall.

WAN (Internet)—Internet  device connection for connecting the firewall to a  
wide area network device, such as a cable or DSL modem.

POWER—Switch that toggles power to the device on or off. 

12VDC—Power port that connects the firewall to the  provided 12VDC 
power adapter. 

USB—Type A USB port on the right side of the housing that supports 
3G/4G/LTE USB dongles. 

Wireless

The light is off when the wireless radio is 
disabled (switched off). It flashes green when the 
wireless radio is transmitting or receiving data. 

The button, when held for 5 seconds or more, 
switches the wireless radio on or off. The button 
and the LED is lit green when the wireless radio is 
enabled  (switched on). 

LAN (1-4)

The numbered lights correspond to the LAN 
ports on the back panel.

Lit green when the corresponding port is 
connected to a device. Flashes green when the 
port is sending or receiving data.