Cisco Systems SN 5428 Manual De Usuario

A Cisco SN 5428 Storage Router running software release 3.5.3 or later is also interoperable with an IP
host running Microsoft Windows® 2000, Microsoft Windows XP, or Microsoft Windows Server™ 2003
and the Microsoft iSCSI Software Initiator package, version 1.03 or higher. You can download the
Microsoft iSCSI Software Initiator package, which includes the Microsoft iSCSI initiator service and
the Microsoft iSCSI Initiator software driver, from

.

SN 5428 interoperability information is available on Cisco.com. You can access the interoperability
matrix by following these instructions:

At

, click Products & Solutions, and select Storage Networking and SN 5400

Series Storage Routers from the menu.

At the Cisco Storage Networking Products web page, click the Cisco SN 5400 Series Storage Routers
link.

At the Cisco SN 5400 Series Storage Routers web page, click Technical Documentation from the
navigation menu on the left side of the page.

Click the Tech Notes link, and then click the Cisco SN 5428 and SN 5428-2 Interoperability Matrix
link.

The SN 5428 LUN trespass feature provides LUN failover capability for selected storage arrays that
operate on the active/passive port model.The trespass feature has been tested with the following storage
arrays:

EMC Clarion 4500/4700

EMC Clarion Cx400

HP MSA1000, with firmware version 4.24

This section describes new and changed features in Release 3.5.1, and includes the following
information: