Cisco Systems 3825 Manual De Usuario
4-61
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Chapter 4 Configuring the Cisco 3825 Mobile Wireless Edge Router in a RAN-O Solution with the Command-Line
Saving Configuration Changes
Saving Configuration Changes
After you have completed configuring your Cisco 3825 router, to prevent the loss of the router
configuration, you must store the configuration changes by saving it to nonvolatile random-access
memory (NVRAM) so that the router boots with the configuration you entered.
configuration, you must store the configuration changes by saving it to nonvolatile random-access
memory (NVRAM) so that the router boots with the configuration you entered.
Step 1
Exit the global configuration mode.
Router(config)# exit
Tip
You can press Ctrl-Z in any mode to return immediately to enable mode (
Router#
), instead of entering
exit, which returns you to whatever mode you were in previously.
Step 2
Save the configuration changes to NVRAM so that they are not lost during resets, power cycles, or power
outages.
outages.
Router# copy running-config startup-config
Example Configurations
The following examples show sample configurations for the:
•
BTS/Node-B side of the Cisco 3825 Mobile Wireless Edge Router
•
Base Station Controller/Radio Network Controller (BSC/RNC) side of the Cisco 3825 Mobile
Wireless Edge Router
Wireless Edge Router
BTS/Node-B Configuration
!
version 12.4
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption
!
hostname
hostname
!--- Enter <hostname> here
!
boot-start-marker
boot system flash slot0:
!--- Image Name
boot-end-marker
!
card type e1 0 0
card type e1 0 1
card type e1 0 2
logging buffered 1000000 debugging
enable password
!--- Set the ENABLE password here
!
no aaa new-model
!
resource manager
!
clock timezone EST -5
!--- Example of setting time zone
!