Cisco Systems WAP4410N Manual De Usuario
Configuring the WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet
42
6
Enabling RADIUS Connection Control
To enable RADIUS connection control for your access point, follow these steps:
STEP 1
Click Wireless > Connection Control.
STEP 2
Click RADIUS.
STEP 3
Provide the following information:
•
Primary/Backup RADIUS Server—Enter the IP address of the RADIUS
server. The Backup Radius server is used only if the primary server is
unavailable.
server. The Backup Radius server is used only if the primary server is
unavailable.
•
Primary/Backup RADIUS Server Port—Enter the port number used by the
RADIUS server. The default is 1812. The backup Radius server is used only
if the primary server is unavailable.
RADIUS server. The default is 1812. The backup Radius server is used only
if the primary server is unavailable.
•
Primary/Backup Shared Secret—Enter the Shared Secret key used by the
access point and RADIUS server. The backup Radius server is used only if
the primary server is unavailable.
access point and RADIUS server. The backup Radius server is used only if
the primary server is unavailable.