Cisco Systems WAP4410N Manual De Usuario

WAP4410N Wireless-N Access Point with Power Over Internet

72

Q. What is the maximum number of users the access point can handle?

No more than 63, but this depends on the volume of data and may be fewer if 
many users create a large amount of network traffic. 

Q. How do I configure multiple WAP4410N access points with the same 

configuration?

Configure one access point and then save the configuration file through its web 
page. 

Using a text editor, change the command "

secret_shown=1" to 

"

secret_shown=0" in the configuration file, and then save the file. 

Restore the file to the access point through its web page and save the 
configuration, naming it 

AP_Config.cfg. 

At this point, all keys and passwords are shown in clear text. 

Restore the 

AP_config.cfg file on other access point’s through their web pages 

one by one. 

Almost all wireless products require Microsoft Windows. Windows is the most 
used operating system in the world and comes with many features that help make 
networking easier. These features can be accessed through Windows Help and 
are described in this appendix.

Before a computer can communicate with the access point, TCP/IP must be 
enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate 
over a network. This is true for wireless networks as well. Your PCs will not be able 
to utilize wireless networking without having TCP/IP enabled. Windows Help 
provides complete instructions on enabling TCP/IP.