Cisco Systems UBR924 Manual De Usuario
D-1
Cisco uBR924 Software Configuration Guide
OL-0337-05 (8/2002)
A P P E N D I X
D
New and Changed Commands Reference
All cable-specific commands for the Cisco uBR924 cable access router in Cisco IOS Release 12.2(8)
and later releases are described in the Cable CPE Commands chapter in the Cisco Broadband Cable
Command Reference Guide, available on Cisco.com and the Customer Documentation CD-ROM. This
chapter is regularly updated to include all command changes and additions.
and later releases are described in the Cable CPE Commands chapter in the Cisco Broadband Cable
Command Reference Guide, available on Cisco.com and the Customer Documentation CD-ROM. This
chapter is regularly updated to include all command changes and additions.
Note
To locate the documentation for the “related commands” mentioned in this chapter, use the Cisco IOS
Release 12.2 command reference master index that is available on Cisco.com and the Documentation
CD-ROM.
Release 12.2 command reference master index that is available on Cisco.com and the Documentation
CD-ROM.
Commands Reserved for DOCSIS Use
In Cisco IOS Release 12.1(2)T and later releases, the following commands were removed from the CLI:
•
[no] cable-modem downstream saved channel
•
[no] cable-modem fast-search
•
[no] cable-modem downstream symbol rate
•
[no] cable-modem transmit-power
•
[no] cable-modem upstream preamble qpsk
In Cisco IOS Release 12.1(2)T and later software releases, these commands are now reserved exclusively
for DOCSIS use. These commands can appear in the router’s Cisco IOS configuration file, but they
cannot be given through the router’s CLI.
for DOCSIS use. These commands can appear in the router’s Cisco IOS configuration file, but they
cannot be given through the router’s CLI.