Cisco Systems WRTP54G Manual De Usuario

Wireless-G Broadband Router with 2 Phone Ports

7

Chapter 3: Getting to Know the Router

The Router’s ports and the Reset button are located on the back panel of the Router.

This Internet port connects to your cable or DSL modem.

For your primary Vonage line, the Phone1 port allows you to connect the Router to your 
telephone (or fax machine) using an RJ-11 telephone cable (not included).

If you have a second Vonage line, the Phone2 port allows you to connect the Router to your 
second telephone (or fax machine) using an RJ-11 telephone cable (not included).

These four Ethernet ports connect to network devices, such as PCs or more switches.

There are two ways to reset the Router's factory defaults. Either press the Reset Button 
for five seconds, or restore the defaults from the Router's Web-based Utility.

The Power port is where you will connect the power adapter.

NOTE: The Factory Default 
feature of the Router’s Web-
based Utility is protected by a 
password available only from 
Vonage. Contact Vonage for 
more information.

NOTE: The Internet port only 
accepts a straight-through 
cable. Do NOT connect a 
crossover cable to the 
Internet port.