Cisco Systems E1200 Manual De Usuario
7
Product overview
Linksys E-Series
Back view
Ethernet ports
Wi-Fi Protected Setup button
Internet port
Power port
Power indicator
•
Ethernet ports—Connect Ethernet cables (also called network cables)
to these Fast Ethernet (10/100) ports, color coded blue, and to wired
Ethernet network devices on your network .
•
Internet port—Connect an Ethernet cable (also called a network or
Internet cable) to this port, color coded yellow, and to your modem .
•
Wi-Fi Protected Setup™ button—Press this button to easily configure
wireless security on Wi-Fi Protected Setup-enabled network devices .
For more information, see “How to set up wireless security using Wi-Fi
•
Power indicator—Stays on steadily while power is connected and
following a successful Wi-Fi Protected Setup connection . Flashes slowly
during bootup, during firmware upgrades, and during a Wi-Fi Protected
Setup connection . Flashes quickly when there is a Wi-Fi Protected Setup
error .
•
Power—Connect the included AC power adapter to this port .
CAUTIon
Use only the adapter that came with your router .
Port activity indicator
Green network activity indicator
Network and Internet port
•
Green activity indicator—On Ethernet ports, stays on when a cable
connects the port to another Ethernet port . On the Internet port, stays
on while connected to a modem . On both port types, it flashes while
transferring data .
Bottom view
•
Reset button—Press and hold this button for 5-10 seconds (until the
port lights flash at the same time) to reset the router to its factory defaults .
You can also restore the defaults using the browser-based utility . For