Cisco Systems WRP400 Manual De Usuario
ATA Routing Field Reference
WAN Setup page
ATA Administration Guide
114
A
Router tab > WAN Setup page >
Static IP Settings section
Router tab > WAN Setup page >
PPPoE Settings section
Static IP
Static IP address of ATA device, which takes effect if
DHCP is disabled.
DHCP is disabled.
The default is 0.0.0.0.
NetMask
The NetMask used by ATA device when DHCP is
disabled.
disabled.
The default is 255.255.255.0.
Gateway
The default gateway used by ATA device when DHCP
is disabled.
is disabled.
The default is 0.0.0.0.
PPPoE Login Name
The account name assigned by the ISP for connecting
on a Point-to-Point Protocol over Ethernet (PPPoE) link.
on a Point-to-Point Protocol over Ethernet (PPPoE) link.
PPPoE Login
Password
Password
The password assigned by the ISP for connecting on a
Point-to-Point Protocol over Ethernet (PPPoE) link.
Point-to-Point Protocol over Ethernet (PPPoE) link.
PPPoE Service Name
The service name assigned by the ISP for connecting
on a Point-to-Point Protocol over Ethernet (PPPoE) link.
on a Point-to-Point Protocol over Ethernet (PPPoE) link.