Cisco Systems WRP400 Manual De Usuario

Regional page

ATA Administration Guide

148

Voice tab > Regional page >

Holding Tone

Informs the local caller that the far end has placed the call 
on hold. 

The default is 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1).

Conference Tone 

Played to all parties when a three-way conference call is in 
progress. 

The default is 350@-19;20(.1/.1/1,.1/9.7/1).

Secure Call 
Indication Tone 

Played when a call has been successfully switched to 
secure mode. It should be played only for a short while 
(less than 30 seconds) and at a reduced level (less than -19 
dBm) so it does not interfere with the conversation. 

The default is 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/
2).

VoIP PIN Tone

Specification of the tone played to prompt a VoIP caller for 
a PIN number (if PIN authentication is selected and the 
caller requires authentication to use the PSTN gateway). 
This setting applies to the SPA3102 only.

The default is 600@-10;*(0/1/1,.1/.1/1,.1/.1/1,.1/.5/1).

PSTN PIN Tone

Specification of the tone played to prompt a PSTN caller 
for a PIN number (if PIN authentication is selected and the 
caller requires authentication to use the VoIP gateway). 
This setting applies to the SPA3102 only.

The default is 600@-10;*(0/.7/1,.2/.1/1,.2/.1/1,.2/.5/1).

Feature Invocation 
Tone

Played when a feature is implemented. 

The default is 350@-16;*(.1/.1/1).

This field is not found in the PAP2T.

Ring1 Cadence 

Cadence script for distinctive ring 1.

The default is 60(2/4).

Ring2 Cadence 

Cadence script for distinctive ring 2.

The default is 60(.3/.2, 1/.2,.3/4).