Cisco Systems WRP400 Manual De Usuario
ATA Voice Field Reference
Line page
ATA Administration Guide
165
B
Line page
Depending on the ATA device, there may be one or more Line pages (L1, L2, and so
on). You can use the Voice tab > Line page to configure the lines for voice service.
With some variations, depending on the model, his page includes the following
sections:
on). You can use the Voice tab > Line page to configure the lines for voice service.
With some variations, depending on the model, his page includes the following
sections:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
In a configuration profile, the Line parameters must be appended with the
appropriate numeral (for example, [1] or [2]) to identify the line to which the setting
applies. The number of lines varies with the model of the ATA device. For example,
the SPA2102 provides two Line tabs (Line 1 and Line 2), while the SPA8000
provides eight tabs (Line1 through Line 8).
appropriate numeral (for example, [1] or [2]) to identify the line to which the setting
applies. The number of lines varies with the model of the ATA device. For example,
the SPA2102 provides two Line tabs (Line 1 and Line 2), while the SPA8000
provides eight tabs (Line1 through Line 8).
More Echo
Suppression
Suppression
Enable or disable more echo suppresion. The default is no.
This field is not found in the PAP2T.