Cisco Systems WRP400 Manual De Usuario

Line page

ATA Administration Guide

172

Voice tab > Line page >

Use Anonymous 
with RPID

When set to yes, use “anonymous” in the SIP message 
when remote party ID is requested in the SIP message. 
This field is found on the SPA2102 only.

Default is yes.

Use Local Addr in 
FROM

The IP address of the local address enclosed in the FROM 
of the SIP message. This field is found on the SPA2102 
only.

Default is no.

Blind Attn-Xfer 
Enable 

Enables the ATA device to perform an attended transfer 
operation by ending the current call leg and performing a 
blind transfer of the other call leg. If this feature is disabled, 
the ATA device performs an attended transfer operation by 
referring the other call leg to the current call leg while 
maintaining both call legs. To use this feature, select yes. 
Otherwise, select no.

The default is no.

MOH Server 

User ID or URL of the auto-answering streaming audio 
server. When only a user ID is specified, the current or 
outbound proxy is contacted. Music-on-hold is disabled if 
the MOH Server is not specified.

Conference Bridge 
URL

This feature supports external conference bridging for n-
way conference calls (n > 2), instead of mixing audio locally. 
To use this feature, set this parameter to that of the server’s 
name, for example, conf@myserver.com:12345 or conf 
(which uses the Proxy value as the domain). This field is 
found on the SPA2102 and PAP2T only.

Conference Bridge 
Ports

Select the maximum number of conference call 
participants. The range is 3 to 10. The default is 3. This field 
is found on the SPA2102 and PAP2T only.