Cisco Systems WRP400 Manual De Usuario

PSTN Line page (SPA3102)

ATA Administration Guide

202

Voice tab > PSTN Line page > 

VoIP-To-PSTN 
Gateway Enable

Enable or disable VoIP-To-PSTN Gateway functionality.

The default is yes. 

VoIP Caller 
Authentication 
Method

Method to be used to authenticate a VoIP Caller to access 
the PSTN gateway. Choose from {none, PIN, HTTP Digest.

The default is none. 

VoIP PIN Max Retry Number of trials to allow VoIP caller to enter a PIN number 

(used only if authentication method is set to PIN).

The default is 3. 

One Stage Dialing

Enable one-stage dialing (applicable if authentication 
method is none, or HTTP Digest, or caller is in the Access 
List).

The default is yes. 

Line 1 VoIP Caller 
DP

Index of the dial plan in the dial plan pool to be used when 
the VoIP Caller is calling from Line 1 of the same SPA3102 
unit during normal operation (in other words, not due to 
fallback to PSTN service when Line 1 VoIP service is 
down). Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}

Authentication is skipped for Line 1 VoIP caller.

The default is 1. 

Default VoIP Caller 
DP

Index of the dial plan in the dial plan pool to be used when 
the VoIP Caller is not authenticated. Choose from {none, 1, 
2, 3, 4, 5, 6, 7, 8}. 

The default is 1. 

Line 1 Fallback DP

Index of the dial plan in the dial plan pool to be used when 
the VoIP Caller is calling from Line 1 of the same SPA3102 
unit due to fallback to PSTN service when Line 1 VoIP 
service is down. Choose from {none, 1, 2, 3, 4, 5, 6, 7, 8}.

The default is 1.