Cisco Systems WRP400 Manual De Usuario
ATA Voice Field Reference
PSTN User page (SPA3102 Only)
ATA Administration Guide
219
B
PSTN User page (SPA3102 Only)
On the SPA3102, you can use the Voice tab > PSTN User page to configure the
PSTN user settings. This page includes the following sections:
PSTN user settings. This page includes the following sections:
•
•
•
•
Voice tab > PSTN User page >
PSTN-To-VoIP Selective Call Forward Settings section
Voice tab > PSTN User page >
PSTN-To-VoIP Speed Dial Settings section
Ring On No New
VM
VM
If enabled, the ATA device will play a ring splash when the
VM server sends SIP NOTIFY message to the ATA device
indicating that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
VM server sends SIP NOTIFY message to the ATA device
indicating that there are no more unread voice mails. Some
equipment requires a short ring to precede the FSK signal
to turn off VMWI lamp.
The default is no.
Cfwd Sel1-8 Caller
Eight PSTN Caller Number Patterns to be blocked for VoIP
gateway services or forwarded to a certain VoIP number. If
the caller is blocked, the SPA will not auto-answers the call.
gateway services or forwarded to a certain VoIP number. If
the caller is blocked, the SPA will not auto-answers the call.
Cfwd Sel1-8 Dest
Eight VoIP destinations to forward a PSTN caller matching
the
the
Cfwd Sel x Caller parameter.
If this entry is blank, the
PSTN caller is blocked for VoIP service.
Speed Dial 1-9
The VoIP number to call when the PSTN caller dials a single
digit ‘2’
digit ‘2’