Cisco Systems WRP400 Manual De Usuario

Setting up Your ATA Device

ATA Administration Guide

37

Use the administration computer to install the latest firmware:

a. Extract the Zip file, and then run the executable file to upgrade the firmware. 

b. When the

 Firmware Upgrade

 

Warning

 window appears, click Continue. 

c. In the next window that appears, enter the IP address of the ATA device, and 

then click OK. 

d. In the 

Confirm Upgrade

 window, verify that the correct device information and 

product number appear. Then click Upgrade. 

e. A progress message appears while the upgrade is in progress. The success 

window appears when the upgrade is completed. The device reboots.

f.

Click OK to close the confirmation message. 

g. To verify the upgrade, point the web browser to the IP address of the ATA 

device. Check the 

Router > Status

 page. The 

Software Version

 field should 

show the firmware version that you installed.

You may need to refresh your browser to display the updated page 
reflecting the new version number.

After installation and basic configuration of your ATA device, you will use the 
administration web server to finish your configuration.

ATA devices support two levels of administration privileges: Administrator and 
User. Both privileges can be password protected. 

By default, there are no passwords assigned for either the Administrator account or 
the User account.