Cisco Systems WRP400 Manual De Usuario

Descargar
Página de 250
Configuring Voice Services
Configuring Dial Plans
ATA Administration Guide
70
4
 
Editing Dial Plans
You can edit dial plans and can modify the control timers.
STEP 1
Start Internet Explorer, and then enter the IP address of the SPA9000. Click Admin 
Login and then click Advanced.
Entering the Line Interface Dial Plan
This dial plan is used to strip steering digits from a dialed number before it is 
transmitted out to the carrier.
STEP 1
Connect to the administration web server, and choose Admin access with 
Advanced settings.
STEP 2
Click Voice tab > Line 
N
, where N represents the line interface number.
STEP 3
Scroll down to the Dial Plan section.
STEP 4
Enter the digit sequences in the Dial Plan field. For more information, see 
.
STEP 5
Click Submit All Changes.
Resetting the Control Timers
You can use the following procedure to reset the default timer settings for all calls. 
NOTE
If you need to edit a timer setting only for a particular digit sequence or type of call, 
you can edit the dial plan. Se
.
STEP 1
Connect to the administration web server, and choose Admin access with 
Advanced settings. 
STEP 2
Click Voice tab > Regional.
STEP 3
Scroll down to the Control Timer Values section.