Cisco Systems CISCO1720 Manual De Usuario

After the router is powered on, the following LEDs confirm that you have correctly installed your router.

For more information about installing or configuring your Cisco 1700 router, refer to the following documents available on
Cisco.com:

Cisco documentation and additional literature are available on Cisco.com. Cisco also provides several ways to obtain technical
assistance and other technical resources. These sections explain how to obtain technical information from Cisco Systems.

You can access the most current Cisco documentation at this URL:

You can access the Cisco website at this URL:

You can access international Cisco websites at this URL:

PWR

Front

On when power is being supplied to the router.

OK

Front

On when the router software is loaded and
functional.

Blinking when the router is running a power-on
self-test (POST). Continuous blinking can indicate
a problem with the router. Refer to the
“Troubleshooting” chapter in the hardware
installation guide for more information.

LNK

Rear

On when the router is correctly connected to the
local Ethernet network through the 10/100
ETHERNET port.

WICØ OK and WIC1

OK

Rear

On when a WAN interface card is correctly
installed in the corresponding WAN interface card
slot.

ETH ACT

Front

Blinking when there is network traffic on the local
Ethernet LAN.

WICØ ACT and WIC1
ACT

Front

On solid or blinking when there is data traffic on
the WAN interface card port(s). Refer to Table 1-4
in the hardware installation guide for detailed
information.