Cisco Systems Cisco IOS XR Manual De Usuario
4-36
Cisco IOS XR Getting Started Guide
OL-10957-02
Chapter 4 Configuring General Router Features
Managing Configuration Sessions
Examples
In the following example, the default commit command is entered in global configuration mode:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface POS 0/0/0/2
RP/0/RP0/CPU0:router(config-if)# description faq
RP/0/RP0/CPU0:router(config-if)# ipv4 address 10.1.1.1 255.0.0.0
RP/0/RP0/CPU0:router(config-if)# commit
RP/0/0/0:Aug 6 09:26:17.781 : %LIBTARCFG-6-COMMIT Configuration committed by user
‘cisco'. Use 'show configuration commit changes 1000000124' to view the changes.
Note
The preceding message is stored in the log and appears only if logging is configured to display on screen.
In the next example, the commit command is entered with the label and comment options in
administration configuration mode:
administration configuration mode:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# configure
RP/0/RP0/CPU0:router(admin-config)# sdr test
RP/0/RP0/CPU0:router(admin-config-sdr:test)# location 0/1/* primary
RP/0/RP0/CPU0:router(admin-config-sdr:test)# commit label test comment This is a test
RP/0/RP0/CPU0:router(admin-config)# show configuration commit list detail
1) CommitId: 2000000018 Label: test
UserId: jbowman Line: vty1
Client: CLI Time: 23:45:40 UTC Tue Mar 07 2006
Comment: This is a test
.
.
.
Note
Configuration files are stored on the same flash disk as the boot image. Access these configurations only
through the CLI commands for configuration management, history, and rollback. Direct modification or
deletion of these files can result in lost router configurations.
through the CLI commands for configuration management, history, and rollback. Direct modification or
deletion of these files can result in lost router configurations.
Reloading a Failed Configuration
If the router displays a configuration failure message when you attempt to commit a configuration
change, the configuration changes are not lost. While you remain in global configuration mode or
administration configuration mode, you can load the configuration changes into the target configuration,
correct the errors, and commit the changes. To load a failed configuration, go to global configuration or
administration configuration mode and enter the load configuration failed commit command, as shown
in the following example:
change, the configuration changes are not lost. While you remain in global configuration mode or
administration configuration mode, you can load the configuration changes into the target configuration,
correct the errors, and commit the changes. To load a failed configuration, go to global configuration or
administration configuration mode and enter the load configuration failed commit command, as shown
in the following example:
RP/0/0/CPU0:router(config)# load configuration failed commit
RP/0/0/CPU0:router(config)# show configuration
Building configuration...
taskgroup bgp
!
end