Cisco Systems Cisco IOS XR Manual De Usuario
4-12
Cisco IOS XR Getting Started Guide
OL-10957-02
Chapter 4 Configuring General Router Features
CLI Prompt
Note
Passwords are case sensitive. If you want to log in to an SDR using a root-system username from the
owner SDR, enter the username in the following format: username@admin. To support admin login,
local database authentication must be enabled with the aaa authentication login remote local
command. For more information, see Cisco IOS XR System Security Configuration Guide.
owner SDR, enter the username in the following format: username@admin. To support admin login,
local database authentication must be enabled with the aaa authentication login remote local
command. For more information, see Cisco IOS XR System Security Configuration Guide.
After you log in, the router displays the CLI prompt, which is described in the
. The command set that you can use is determined by the privileges assigned to your username.
For information on how privileges are assigned to usernames, see the Cisco IOS XR System Security
Configuration Guide.
Configuration Guide.
CLI Prompt
After you log in, you see the CLI prompt for the Cisco IOS XR software. This prompt identifies the
router or SDR to which you are issuing commands. The CLI prompt represents the path, through the
router, to the CPU that executes the commands you enter. The syntax for the CLI prompt is:
type/rack/slot/module: router-name#. The CLI prompt is described in
router or SDR to which you are issuing commands. The CLI prompt represents the path, through the
router, to the CPU that executes the commands you enter. The syntax for the CLI prompt is:
type/rack/slot/module: router-name#. The CLI prompt is described in
.
For example, the following prompt indicates that the CLI commands are executed on the RP in rack 0,
slot RP0, by the “CPU0” module on a router named “router:”
slot RP0, by the “CPU0” module on a router named “router:”
RP/0/RP0/CPU0:router#
Table 4-1
CLI Prompt Description
Prompt Syntax Components
Description
type
Type of interface or card with which you are communicating. For
most user communication tasks, the type is “RP.”
most user communication tasks, the type is “RP.”
rack
Rack number. In a standalone router, the rack number is always “0.”
In a multishelf system, the range for LCC rack numbers is 0 to 255,
and the range for FCC rack numbers is F0 to F7.
In a multishelf system, the range for LCC rack numbers is 0 to 255,
and the range for FCC rack numbers is F0 to F7.
slot
Slot in which the RP or DRP is installed. In a Cisco CRS-1 router, the
RP physical slot number is “RP0” or “RP1.” In a
Cisco XR 12000 Series Router, the physical slot number can be 0 to
15, and there can be multiple SDRs, each of which is represented by
an RP.
RP physical slot number is “RP0” or “RP1.” In a
Cisco XR 12000 Series Router, the physical slot number can be 0 to
15, and there can be multiple SDRs, each of which is represented by
an RP.
module
Entity on a card that executes user commands or communicates with
a port (interface). For executing commands from the EXEC prompt,
the module is the “CPU0” of the RP. “CPU0” also controls the
forwarding and operating system (OS) functions for the system.
DRPs have two processors: CPU0 and CPU1.
a port (interface). For executing commands from the EXEC prompt,
the module is the “CPU0” of the RP. “CPU0” also controls the
forwarding and operating system (OS) functions for the system.
DRPs have two processors: CPU0 and CPU1.
router-name
Hostname of the router or SDR. The hostname is usually defined
during initial configuration of the router, as described in the
during initial configuration of the router, as described in the