Cisco Systems Cisco 7513/7576 Manual De Usuario
1
Cisco Systems, Inc.
All rights reserved.
All rights reserved.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
San Jose, CA 95134-1706
USA
Cisco Systems, Inc.
Corporate Headquarters
Copyright © 1996-1998
Text Part Number:
Cisco 7513 and Cisco 7576
Cable-Management Bracket Installation
Instructions
Cable-Management Bracket Installation
Instructions
Product Numbers: ACS-7513CBLM= (Cisco 7513), ACS-7576CBLM= (Cisco 7576)
Customer Order Number: DOC-782473=
The cable-management bracket for the Cisco 7513 and Cisco 7576 chassis is a spare part that can be
installed in the field. This publication describes the procedure required to install the
cable-management bracket.
installed in the field. This publication describes the procedure required to install the
cable-management bracket.
Document Contents
This publication contains the following sections:
•
•
•
Product Overview
The Cisco 7513 and Cisco 7576 cable-management bracket is mounted above the card cage, on the
interface processor end of the chassis. (See Figure 1.) The bracket allows you to route cables away
from the interface processors, which keeps this area clear for any future maintenance requirements.
interface processor end of the chassis. (See Figure 1.) The bracket allows you to route cables away
from the interface processors, which keeps this area clear for any future maintenance requirements.
Note
The Cisco 7513 and Cisco 7576 use the same chassis and cable-management bracket.
However, the backplane and the interface processor slot numbering scheme on the card cages are
different. The interface processor slot numbering scheme of the Cisco 7513 is shown in Figure 1.
The slot numbering scheme has no effect on the location or installation of the cable-management
bracket.
different. The interface processor slot numbering scheme of the Cisco 7513 is shown in Figure 1.
The slot numbering scheme has no effect on the location or installation of the cable-management
bracket.
78-2473-02