Cisco Systems CISCO7201 Manual De Usuario
1-11
Cisco 7201 Installation and Configuration Guide
OL-11364-04
Chapter 1 Overview
Checking the Shipping Container Contents
Checking the Shipping Container Contents
Use the Cisco 7201 components list to check the contents of the Cisco 7201 router shipping container.
Do not discard the shipping container. You need the container if you move or ship the Cisco 7201 router
in the future.
Do not discard the shipping container. You need the container if you move or ship the Cisco 7201 router
in the future.
Note
Most Cisco documentation is online or on the Cisco Documentation DVD. Documentation that ships
with your Cisco 7201 router includes the Regulatory Compliance and Safety Information for Cisco 7200
Series Routers document, and the Cisco 7201 Router Documentation Roadmap that contains
documentation titles and the URLs to them online. See also the
with your Cisco 7201 router includes the Regulatory Compliance and Safety Information for Cisco 7200
Series Routers document, and the Cisco 7201 Router Documentation Roadmap that contains
documentation titles and the URLs to them online. See also the
Cisco 7201 Router Installation Checklist
To assist you with your installation and to provide a historical record of what was done by whom,
photocopy the Cisco 7201 Router Installation Checklist,
photocopy the Cisco 7201 Router Installation Checklist,
. Indicate when each
procedure or verification is completed. When the checklist is completed, place it in your site log along
with the other records for your new router.
with the other records for your new router.
Information on replacing internal field-replaceable units (FRUs) is found in
Table 1-1
Cisco 7201 Components List
Component
Description
Received
Chassis
Cisco 7201 chassis configured with dual AC or dual DC power supplies and a port
adapter blank panel if a port adapter has not been ordered.
adapter blank panel if a port adapter has not been ordered.
Accessories:
•
Rack-mount and
cable-management kit
cable-management kit
•
Power cables
•
Documentation
The following accessories might arrive in separate shipping containers or might ship
installed:
installed:
Two rack-mount brackets, one cable-management bracket, four 6-32 x 0.25-in.
screws to secure the rack-mount brackets to the chassis, four 10-32 or 12-24 screws
to secure the rack-mount brackets to a 19-inch rack, or a 21–23-inch rack, and one
M4 x 20-mm screw to attach the cable-management bracket to the rack-mount
bracket
screws to secure the rack-mount brackets to the chassis, four 10-32 or 12-24 screws
to secure the rack-mount brackets to a 19-inch rack, or a 21–23-inch rack, and one
M4 x 20-mm screw to attach the cable-management bracket to the rack-mount
bracket
An AC power cable, if an AC power supply was ordered
Router hardware and software documentation and the Cisco Documentation DVD
package
package
An optional Cisco USB Flash memory module, if ordered
Optional Equipment
Examples: Port adapter, SFP modules, CompactFlash Disk, network interface cables,
USB memory modules, transceivers, special connectors, and so on
USB memory modules, transceivers, special connectors, and so on