Cisco Systems CISCO7201 Manual De Usuario

Inner clearance (the width between the inner sides of the two posts or rails) must be at least 19 inches 
(48.26 cm). The height of the chassis is 1.73 inches (4.39 cm). Airflow through the chassis is from front 
to back.

Make sure that the port adapter lever is in the locked position.

Make sure the rack brakes are locked or the rack is stabilized.

Position the router so the front is closest to you and lift it carefully into the rack. To prevent injury, avoid 
any sudden twists or moves.

Slide the chassis into the rack, pushing it back until the brackets meet the mounting strips or posts on 
both sides of the rack.

Keeping the brackets flush against the posts or mounting strips, align the holes in the brackets with the 
holes on the rack or mounting strip.

For each bracket, insert and tighten two 10-32 or 12-24 screws to the rack.

This completes the procedure for installing the chassis in the rack. Proceed to the 

 to continue the installation.

Four-post rack

Four 10-32 or 12-24 screws 

Screw hole for the cable-management bracket

ENA

BL

ED

RX

 C

ELLS

RX 

CARRIER

RX 

ALA

RM

ATM

 

281

127

Cisco 7201