Cisco Systems CISCO7201 Manual De Usuario

Before connecting a terminal to the console port, configure the terminal to match the router console port 
as follows: 9600 baud, 8 data bits, no parity, 1 stop bits (9600 8N1). 

After you establish normal router operation, you can disconnect the terminal.

When using the Fast Ethernet Management port in the default mode (speed-auto and duplex-auto) the 
port operates in auto-MDI/MDI-X mode. The port automatically provides the correct signal connectivity 
through the Auto-MDI/MDI-X feature. The port automatically senses a crossover or straight-through 
cable and adapts to it.

However, when the Fast Ethernet Management port is configured to a fixed speed (10 or 100 Mbps) 
through command-line interface (CLI) commands, the port is forced to MDI mode. 

Auxiliary port

Cable to console terminal or DTE

Console port

Cable to modem or DCE

RJ-45 connector

170866

Cisco 7201

Fast Ethernet Management port

Fast Ethernet RJ-45 cable

170868