Cisco Systems CISCO7201 Manual De Usuario

ROMmon upgrade image is too big:

Router: upgrade rom-monitor file tftp://00.0.00.0/biff/c7200p-kboot-mz

Loading biff/C7200_NPEG2_RMFUR.srec from 00.0.00.0 (via GigabitEthernet0/1):

 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 392348 bytes]

ROMMON upgrade aborted; new ROMMON is too big

Hardware does not support ROMmon upgrade:

Router: upgrade rom-monitor file tftp://00.0.00.0/biff/c7200p-kboot-mz

Loading biff/C7200_NPEG2_RMFUR.srec from 00.0.00.0 (via GigabitEthernet0/1):

 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 392348 bytes]

ROMMON upgrade aborted; Current ROMMON does not support upgrade capability

Upgrade command with incorrect file type:

Router# upgrade rom-monitor file tftp://00.0.00.0/biff/c7200p-kboot-mz

from 00.0.00.0 (via GigabitEthernet0/1):!!!!!!!!!!!!!!!

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[OK - 524288 bytes]

%Error:not srec file

Router#

A boot of a corrupted upgrade image:

System Bootstrap, Version 12.2(20031011:151758) [pgettner-npeg1-fur 135], DEVELOPMENT 

SOFTWARE

Copyright (c) 1994-2003 by cisco Systems, Inc.

 Upgrade ROMMON corrupted.

 Falling to ReadOnly ROMMON

ROM:Rebooted by watchdog hard reset

C7201 platform with 1048576 Kbytes of main memory

Readonly ROMMON initialized

rommon 1 >

A field-programmable gate array (FPGA) device exists on the Cisco 7201. FPGA devices are a type of 
field-programmable device (FPD) that support separate software upgrades. Whenever a Cisco image is 
released that supports the FPD feature, a companion FPD image package is also released for that 

 

Cisco IOS software release. The FPD image package is available from Cisco.com and is accessible from 
the Cisco Software Center page where you go to download your Cisco IOS software image.

 

document at 

http://www.cisco.com/en/US/docs/routers/7200/configuration/feature_guides/fpd.html