Cisco Systems CISCO7201 Manual De Usuario

Attach an ESD-preventive wrist strap between you and an unpainted chassis surface.

Locate the label on the SFP module and turn the SFP module so the label is on top and the alignment 
groove is on the bottom.

The SFP module is keyed so that it cannot be inserted incorrectly.

Insert the SFP module into Gigabit Ethernet port 0/0, 0/1, 0/2, or 0/3. The SFP module snaps into place 
when you have completely and properly inserted it.

Repeat Step 2 and Step 3 if you are inserting a second, third, or fourth SFP module.

Do not remove the plug from the SFP optical bores until you are ready to install the network interface 
optical fiber cable. Save the plug for future use.

Clean the optical fiber cable before attaching it to the SFP module. For information, see the 

Compressed Air Cleaning Issues for 

 document.

This completes the SFP module installation procedure.

For CompactFlash Disk specifications and product numbers, see 

 For use 

of the CompactFlash Disk, also see 

Inserting the CompactFlash Disk

Pressing the ejector button to release the 
CompactFlash Disk

170871