Cisco Systems IPMUX-1E Manual De Usuario
IPmux-1/1E Installation and Operation Manual
Appendix E Configuration Menus
Connection Configuration: CESoIP Mode
E-35
Activation Criterion
Activation Criterion
1. Pattern ID 1
2. Tx A 1
3. Tx B N/C
4. Tx C N/C
5. Tx D N/C
ESC. Exit D. Delete N. Next
Figure E-36. Activation Criterion Menu
Table E-23. Activation Criterion Parameters
Parameter Possible
Values
Remarks
Pattern ID
1
to 4
An OR operation will be performed on the pattern
defined here
At least one pattern must be defined. For each
defined pattern at least one bit must be configured
At least one pattern must be defined. For each
defined pattern at least one bit must be configured
to either 0 or 1.
Tx A
0, 1
N/C
N/C
Defines CAS A bit
Ignored
Ignored
Tx B
0, 1
N/C
N/C
Defines CAS B bit
Ignored
Ignored
Tx C
0, 1
N/C
N/C
Defines CAS C bit
Ignored
Ignored
Tx D
0, 1
N/C
N/C
Defines CAS D bit
Ignored
Ignored
E.8 Connection Configuration: CESoIP Mode
To configure the Connection:
1. Select 1 to enter the Connection Mode. Use the <Space bar> to select
1. Select 1 to enter the Connection Mode. Use the <Space bar> to select
CESoIP
and then press <Enter>.
Main Menu
↓
2. Configuration
↓
3. Bundle
Connection
Connection
Configuration
Main Menu
↓
2. Configuration
↓
3. Connection
Configuration
Configuration
↓
3.
Activation
Criterion