Cisco Systems IPMUX-1E Manual De Usuario
IPmux-1/1E Installation and Operation Manual
Appendix E Configuration Menus
Ethernet Configuration/Status – with Ethernet User Port
E-53
Erase MAC Table
The MAC table is erased automatically every time you change the general
operating mode of the switch, or you remove a VLAN membership.
operating mode of the switch, or you remove a VLAN membership.
To erase the MAC Table: x
1. On the Switch Configuration menu, select 3.
1. On the Switch Configuration menu, select 3.
A confirmation line appears.
Traffic will be disrupted. Are you sure?
Figure E-50. Erase MAC Table Confirmation
2. Answer Y to erase the table.
Erasing the MAC table takes about 2 seconds, during which time all traffic
through the switch is halted.
through the switch is halted.
VLAN Configuration
When working in Basic/Rate modes, a warning prints: VLAN tagging must be
enabled for VLAN table to take effect.
enabled for VLAN table to take effect.
VLAN CONFIGURATION
VLAN ID
1
Network
No
User1
No
Network VLANs:
User1 VLANs:
Internal VLANS:
ESC. Exit
Select item from the menu:
Figure E-51. VLAN Configuration
Main Menu
↓
2. Configuration
↓
4. Switch
Configuration
Configuration
↓
4. VLAN
Configuration
Configuration
Note
Main Menu
↓
↓
2. Configuration
↓
↓
4. Switch
Configuration
↓
↓
3. Erase MAC
Table