Cisco Systems DPC2420 Manual De Usuario

 

4 

4021194 Rev A 

The front panel of your residential gateway provides LED status indicators that 
indicate how well and at what state your residential gateway is operating. See 
Operation of Front Panel Indicators (on page 95), for more information on front 
panel LED status indicator functions. 

 

 

1  POWER—ON, power is applied to the residential gateway 
2  DS—ON, the residential gateway is receiving data from the cable network 
3  US—ON, the residential gateway is sending data to the cable network 
4  ONLINE—ON, the residential gateway is registered on the network and fully 

operational  

5  PC—ON, power is applied to the residential gateway 
6  WLAN—ON, the wireless access point is operational. BLINKING indicates that 

data is being transferred over the wireless connection. OFF indicates that the 
wireless access point has been disabled by the user 

7  WLAN SETUP—OFF (normal condition), wireless setup is not active. 

BLINKING indicates the user has activated wireless setup to add new wireless 
clients on the wireless network 

8  LINE1—ON indicates telephony service is enabled. Blinks when LINE1 is in use. 

OFF indicates that phone service for LINE1 is not enabled 

9  LINE2—ON indicates telephony service is enabled. Blinks when LINE2 is in use. 

OFF indicates that phone service for LINE2 is not enabled (OPTIONAL) 

Note: After the residential gateway is successfully registered on the network, the 
POWER, DS, US, and ONLINE LEDs illuminate continuously to indicate that the 
residential gateway is active and fully operational.