Cisco Systems Broadband Access Center Manual De Usuario

The Shared Secret Password screen appears.

Enter and confirm the shared secret password. This password is a token that a BACC server uses to 
authenticate communication with other BACC servers.

Click Next and the Lab Installation Parameters screen appears. This screen identifies the values that you 
have entered in the previous screens. To modify any of the values entered:

Click Back until the desired screen appears.

Make the necessary changes.

Click Next repeatedly until you return to this screen.

Click Next and the lab version of BACC is installed. When installation is complete, the Installation 
Summary screen appears. 

Click Finish and BACC is completely installed in your lab environment.

You use the administrator’s user interface to configure your license keys. Refer to the Cisco Broadband 
Access Center for Cable Administrator’s Guide for additional information.

After installation is complete, you must install your licenses and the chain of certificates or the KDC 
will not start. 

The lab installation prompts for this information:

BACC destination directory

Network Registrar administrator username and password

Shared secret password

Kerberos Realm Name

Specifies, using a unique name, the Kerberos realm. This must match the 
realm set at the associated components.

IP Address of Primary 
DHCP Server

Specifies the IP address of the voice technology primary DHCP server.

IP Address of Primary DNS 
Server

Specifies the IP address of the computer which is running the primary 
DNS server. 

IP Address of Secondary 
DHCP Server

Specifies the IP address of the voice technology secondary DHCP server.

IP Address of Secondary 
DNS Server

Specifies the IP address of the computer which is running the secondary 
DNS server; if that server is being used.