Cisco Systems OL-7426-03 Manual De Usuario
5/26/05
Cisco 1000 Series Lightweight Access Point Connectors
OL-7426-03
About Cisco 1000 Series Lightweight Access Point Connectors
Cisco 1000 Series Lightweight Access Point Connectors
The AP1020 and AP1030 Cisco 1000 Series lightweight access points have the following external
connectors:
connectors:
•
One RJ-45 Ethernet jack, used for connecting the Cisco 1000 Series lightweight access point to
the network.
the network.
•
One 48 VDC power input jack, used to plug in an optional factory-supplied external power
adapter.
adapter.
•
Three male reverse-polarity TNC antenna jacks, used to plug optional external antennas into
the Cisco 1000 Series lightweight access point: two for an 802.11b/g radio, and one for an
802.11a radio.
the Cisco 1000 Series lightweight access point: two for an 802.11b/g radio, and one for an
802.11a radio.
Figure -
Cisco 1000 Series Lightweight Access Point External Antenna Connectors
Note:
The AP1010 Cisco 1000 Series lightweight access points are designed to be
used exclusively with the internal high-gain antennas, and have no jacks for external
antennas.
antennas.