Cisco Systems 1900 Series Manual De Usuario
5-19
Cisco 1900 Series Hardware Installation
OL-19084-02
Chapter 5 Configuring the Router
Performing the Initial Configuration on the Router
•
, sample configuration
•
, sample configuration
•
, tech note
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
line aux 0
4.
See the tech notes and sample configurations to configure the line for your particular
implementation of the auxiliary port.
implementation of the auxiliary port.
DETAILED STEPS
Verifying Network Connectivity
This section describes how to verify network connectivity for your router.
Prerequisites
•
Complete all previous configuration tasks in this chapter.
•
The router must be connected to a properly configured network host.
SUMMARY STEPS
1.
enable
2.
ping [ip-address | hostname]
3.
telnet {ip-address | hostname}
Command or Action
Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
•
Enter your password if prompted.
Step 2
configure
terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
line
aux 0
Example:
Router(config)# line aux 0
Starts the line configuration command collection mode for
the auxiliary line.
the auxiliary line.
Step 4
See the tech notes and sample configurations to
configure the line for your particular implementation
of the auxiliary port.
configure the line for your particular implementation
of the auxiliary port.
—