Cisco Systems OL-7396-01 Manual De Usuario

To display the SSH utilization, use the following privileged EXEC command:

The following example displays the SSH configuration on the switch router:

Cat8540# show ssh 

Connection      Version Encryption      State                   Username 

 0              1.5     3DES            Session started         aarun 

The following example clears the outgoing SSH connection 0 using the disconnect ssh command:

Cat8540# disconnect ssh 0

[Connection to 10.13.1.98 closed by foreign host]

Cat8540#

The following example is sample output from the show ip ssh privileged EXEC command when the SSH 
server is enabled.

Switch# show ip ssh

SSH Enabled - version 1.5

Authentication timeout: 120 secs; Authentication retries: 3

The following example is sample output from the show ip ssh privileged EXEC command when the SSH 
server is disabled.

Switch# show ip ssh

SSH Disabled - version 1.5

%Please create RSA keys to enable SSH.

Displays SSH connection information.

disconnect ssh session-id

Disconnects an SSH session.

Displays the SSH configuration.