Cisco Systems OL-7396-01 Manual De Usuario

If no system image is specified in the startup configuration, the ROM monitor automatically boots the 
first system image on the Flash PC card in slot0. If there is no system image on the Flash PC card, or the 
Flash PC card is not available, the ROM monitor boots the first system image in bootflash. If there is no 
system image in bootflash, the switch remains in ROM monitor mode.

To display the configuration register value, use the following privileged EXEC command:

The following example shows the configuration register value:

Switch# show version

Cisco Internetwork Operating System Software 

IOS (tm) PNNI Software (cat8540m-WP-M), Version XX.X(X)WX(X),  RELEASE SOFTWARE

Copyright (c) 1986-19XX by cisco Systems, Inc.

Compiled Mon XX-XXX-XX 10:15 by integ

Image text-base: 0x60010930, data-base: 0x606CE000

ROM: System Bootstrap, Version XX.XXX.X(X)WX(X) [BLD-JAGUAR120-4.0.9 ], E

Switch uptime is 3 weeks, 5 days, 23 hours, 30 minutes

System restarted by bus error at PC 0x6007EF24, address 0xFC

System image file is "bootflash:cat8540m-wp-mz.XXX-X.X.WX.X.XX"

cisco C8540MSR (R5000) processor with 65536K/256K bytes of memory.

R5000 processor, Implementation 35, Revision X.X (512KB Level 2 Cache)

Last reset from power-on

1 Ethernet/IEEE 802.3 interface(s)

9 ATM network interface(s)

507K bytes of non-volatile configuration memory.

8192K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).

8192K bytes of Flash internal SIMM (Sector size 256K).

Secondary is up

Secondary has 0K bytes of memory.

Configuration register is 0x100 (will be 0x2102 at next reload)

During normal operation, the startup and running configurations are synchronized by default between 
the two route processors. In the event of a switchover, the new primary route processor uses the current 
configuration. Configurations synchronize either immediately from the command line or during route 
processor switchover.

Displays the configuration register value.