Cisco Systems OL-7396-01 Manual De Usuario

The following example shows how to enable redistribution of static routes:

Switch(config)# atm router pnni

Switch(config-atm-router)# node 1

Switch(config-pnni-node)# redistribute atm-static

To display the node redistribution configuration, use the following privileged EXEC command:

The following example shows the node redistribution configuration using the show atm pnni local-node 
privileged EXEC command:

Switch# show atm pnni local-node

  PNNI node 1 is enabled and running

    Node name: Switch

    System address 47.00918100000000400B0A3081.00400B0A3081.00

    Node ID 56:160:47.00918100000000400B0A3081.00400B0A3081.00

    Peer group ID 56:47.0091.8100.0000.0000.0000.0000

    Level 56, Priority 0, No. of interfaces 4, No. of neighbors 2

    Node Allows Transit Calls

 

    Hello interval 15 sec, inactivity factor 5,

    Hello hold-down 10 tenths of sec

    Ack-delay 10 tenths of sec, retransmit interval 5 sec,

    Resource poll interval 5 sec

    PTSE refresh interval 1800 sec, lifetime factor 200 percent,

    Min PTSE interval 10 tenths of sec

    Auto summarization: on, Supported PNNI versions: newest 1, oldest 1

    Default administrative weight mode: uniform

    Max admin weight percentage: -1

    Next resource poll in 3 seconds

    Max PTSEs requested per PTSE request packet: 32

Redistributing static routes: Yes

The aggregation token controls the grouping of multiple physical links into logical links. Uplinks to the 
same higher level node, or upnode, with the same aggregation token value, are represented at a higher 
level as horizontal aggregated links. Resource Availability Information Groups (RAIGs) are computed 
according to the aggregation algorithm.

Displays the node redistribution 
configuration.